128	FaxNow! Setup
5000	The FaxNow! system requires Windows 95 or Windows NT to run the server - it cannot be run on Win32s.  Please locate another machine with either of these operating systems before attempting to install.
5001	FaxNow! Setup
5002	If you exit Setup you will not be able to run FaxNow!\n\nAre you sure that you want to exit ?
5003	You must enter at least one of these names.
5004	Find Data Directory
5005	Find Client Programs Directory
5006	The directory (or part of the required directory tree) you have\nspecified for the data does not exist.\n\nDo you want to create the directory structure ?
5007	The directory you have specified for the programs does not exist.\n\nDo you want to create this directory?
5008	The path you have entered is not fully qualified.\nYou must enter a full path to the directory into which you wish to install.\nEither a UNC (\\server\share\...) or drive letter form (c:\...).
5009	The directory you specified for the data files could not be created.\nPlease specify a different location.
5010	The directory you specified for the program files could not be created.\nPlease specify a different location.
5011	You have not specified the COM port to which the modem is attached.
5012	You have not specified which modem you wish to install.  Please select a modem from the list.
5013	The COM port you specified could not be opened
5014	There was an error whilst communicating with the modem, even though it was initially opened successfully.\nThis could be due to:\n\nA configuration problem with this port\nA hardware conflict (interrupts cannot be shared)\nnA problem with the modem (internal)
5015	Data could not be sent to the COM port because the CTS flow control line is not allowing the data to be sent.\nThis could be due to:\n\nThe wrong serial cable being used\nThe modem is switched off\nThe modem is not connected
5016	Although data was sent to the modem successfully, no response was received.\nThis could be due to:\n\nThe modem is switched off\nThe wrong cable is being used\nThere is no modem connected\nThe wrong serial port has been selected
5017	The response read from the COM port was not valid.  This may be due to:\n\nThere is no modem connected\nThe cable is looped back\nThe modem may need to be switched off and on again
5018	The data could not be sent to the modem because the system reported that the IRQ that the modem has been configured for is shared with another device.  You cannot share interrupt lines when installing devices in your PC.
5019	Starting test
5020	Running diagnostics
5021	Unable to verify presence of fax modem
5022	Detected fax modem supporting class(es):  
5023	Detected a non-fax modem 
5024	The COM port you specified could not be opened because another program (or device) is already using this port.
5025	Setup cannot de-install the old version of FaxNow! because it cannot locate the programs directory entry in registry.
5026	You cannot run the de-install program from a client computer.
5027	There is insufficient disk space on %s to install this program.\nSetup requires %dK, but there is only %dK available.\n\nDo you wish to attempt to install anyway ?
5028	Memory Low - cannot complete Setup
5029	Failed to read the list of files to be installed.  The installation set may be corrupt.
5030	Please insert disk %d into drive %s
5031	Setup failed to install the file %s.\nSetup cannot continue.
5032	Setup could not open the file %s - it may be corrupt.\nSetup cannot continue.
5033	Setup could not read the source installation file %s - it may be corrupt.\nSetup cannot continue.
5034	The existing file %s is write protected.\n\nDo you wish to overwrite this file anyway ?
5035	The file %s is in use by Windows or another application.\nSetup cannot continue.
5036	The file %s could not be installed because of a problem which is related to permissioning.  Please check the rights this user has to install into the target directories.
5037	There is insufficient space to install the file %s.\nSetup cannot continue.
5038	Setup failed to install file %s because it could not rename a file and cannot continue.
5039	FaxNow! requires Windows NT 3.50 or later to run.
5040	Setup failed to install the file %s and cannot continue.
5041	Setup was cancelled by the user.
5042	Setup of FaxNow! is complete!
5043	Setup of FaxNow! is incomplete.  Please run setup again to install FaxNow! server.
5044	Are you sure that you want to uninstall FaxNow!\n\nWARNING:\nRemoving the server will make the system inoperable
5045	RedRock FaxNow! 5
5046	Setup failed to install the program manager entries, but this will not otherwise affect the operation of FaxNow!
5047	Setup has successfully removed FaxNow!
5048	Cannot run the FaxNow! de-install because the program could not be copied to the temporary directory to be run.
5049	Setup could not find any tokens to be installed.  Please select an alternate source directory and try again.
5050	Setup cannot find the file %s to install\nSetup cannot continue.
5051	Cannot find version information when trying to install the file %s.
5052	The directory you have specified for the programs already contains a newer version of this program.\n\nEither:\n1. Remove the version already installed.\n2. Choose a different directory.
5053	Setup could not write the information about the modems that you configured to the registry - they will not be available.  Please use the Fax Server to configure them manually.
5054	You cannot add any further modems!
5055	Setup could not install one or more tokens found on the disk.  The disk may be corrupt, or the destination directory may not be writable.
5056	You have licenses to install %d modems.
5057	You have a license to install 1 modem.
5058	There are %d modems currently installed.
5059	There is 1 modem currently installed.
5060	The COM port you have selected is already allocated to another modem that has been configured.  Please select an alternate port.
5061	(None)
5062	Setup cannot de-install the old version of FaxNow! because it cannot locate the fax data directory entry in registry.
5063	Setup failed to create the user database files in the Admin directory.\nFaxNow! will not run without these files.\nPlease check permissions and disk space and run Setup again.
5064	Cannot update the path entries in registry.\nFaxNow! will not run without updating these entries.\nPlease check permissions and run Setup again.
5065	Checking for and removing any previous version of FaxNow!
5066	Updating registry information...
5067	Updating INI files...
5068	Adding icons to the system...
5069	Adding PhoneBook...
5070	Find License File
5071	%d users
5072	%d evaluation users
5073	%d fax line(s)
5074	%d evaluation fax line(s)
5075	An evaluation license has already been installed on this machine, it is not possible to install an evaluation if one has been installed previously.
5076	An error has occurred whilst attempting to update FaxNow! with your license information. (%d)
5077	Setup has detected an existing evaluation installation of FaxNow! with %d users and %d lines, the existing evaluation will be upgraded, entering a valid license number will install a full licensed copy of FaxNow!.
5078	Setup has detected an existing Full installation of FaxNow! with %d users and %d lines, you must specify a valid upgrade license to install FaxNow!
5079	Setup has detected an existing FaxNow! installation, the existing license information will be used during this installation.
5080	A FaxNow! evaluation license cannot be installed over a FaxNow! full license.\n\nIt is not possible to continue the installation until a valid license number has been provided.
5081	It is not possible to install FaxNow!with the current license as too many users have been defined in the existing FaxNow! installation.\n\nPlease remove some FaxNow! users and retry.
5082	Setup has detected more user licenses in the existing FaxNow! installation than the new FaxNow! license, continuing will reduce the total number of users that can be defined for FaxNow!\n\nAre you sure you wish to continue?
5083	Blacklisted License Number
5084	It is not possible to proceed as the license entered has been blacklisted.
5085	Setup has detected an existing FaxNow! installation, the existing license information will be used during this installation.
5086	Setup has detected an existing personal version of FaxNow!, please enter a license to upgrade to a network version of FaxNow!.
5087	Setup has detected an existing evaluation personal version of FaxNow!, please enter a license to upgrade to a network version of FaxNow!, or leave the license empty to upgrade to a network version evaluation.
5088	You are about to install a network version of FaxNow! over a personal version.\n\nAre you sure you wish to continue?
5089	WARNING: Any previous installation of FaxNow! will be overwritten.  If you are over-writing an existing installation you must ensure that no clients are running and that the server has been shut down.
5090	WARNING: Any previous installation of FaxNow! will be overwritten.  If you are over-writing an existing installation you must ensure that all FaxNow! components have been shut down.
5091	Evaluation Personal License
5092	Personal License
57344	Setup
57345	Ready
57346	The file %s is in use by Windows or another application.\nand Setup failed to delay the install of file %s until next time you re-boot.\nSetup cannot continue.
57347	To complete this installation you need to reboot your PC.\nReboot now?
57348	Failed to obtain privilege required to automatically restart the computer.\nFaxNow! will not function correctly until your computer has been restarted.
57349	Do you wish to configure the installed mail gateway?
57350	Unable to configure mail gateway: configuration may be retried later.
57351	Failed to set up Fax Rendering Process
57352	You can now install modems to be used on this server.  This is a fast configuration and does not set all the possible options.\n\nIf you have a multi-line license then you can install more than one modem.  However, some slower machines may limit the number of simultaneous fax connections.  It is recommended that no more than four lines be connected to slower PCs.
57353	It is not possible to install a personal version of FaxNow! onto a machine with an existing network client. Please unistall the network client and try again.
57354	You may if you wish install another modem for this machine. However, some slower machines may limit the number of simultaneous fax connections.  It is recommended that no more than four lines be connected to slower PCs.\n\nWould you like to install another modem?
57355	No more modems can be installed for this server as the maximum licenced number of modems has already been installed.
57356	No more modems can be installed for this server as there are no more free ports available.
57357	Do you wish to be able to run the Fax Rendering Process on this server?
57358	You are recommended to install NT %s before running FaxNow! software.\n(You currently have %s installed)
57359	no Service Pack
57360	Setup was unsuccessful. Please reboot your PC and run setup again.
57361	Setup was unable to update the existing FaxNow! 3.0 registry settings to FaxNow! 3.1 format. Setup will procede, but some old settings may be lost.
57362	Setup failed to install the RedRock printer driver
57363	Install fax printer driver
57364	Configure mail gateway
57365	Failed to add FaxNow! to the startup program group.
57366	FaxNow! 5
57367	Setup has detected an existing network evaluation installation of FaxNow!, it is not possible to install a personal version over a network version of FaxNow!
57368	Setup has detected an existing network installation of FaxNow!, it is not possible to install a personal version over a network version of FaxNow!
57369	The following information specifies default sender details for when a fax is sent.
57370	Please enter your company, phone and fax details:
57371	Please specify where FaxNow! should be installed. If the default is acceptable, just click Next.
57372	&Install to:
57373	Setup can create a shortcut to FaxNow! in the startup program group so that FaxNow! is automatically started when you log in to Windows. Clear the check box if you do not wish this to happen.
57374	FaxNow!
57375	Failed to register installed OLE servers
57376	OLE initialization failed.  Make sure that the OLE libraries are the correct version.
57377	Setting up the rendering module client. Click on OK to continue with server setup once the client setup process has completed.
57378	Failed to make copy of existing 3.x client uninstallation code
57379	RedRock FaxNow! 5 Server
57380	.OLD
57381	You will need to run FaxNow! Client setup on another machine (with the command-line option "-oI=1") in order to re-use the client settings for the previous version of FaxNow!.
57382	Cannot downgrade the network version of FaxNow! to the single-user version. You must first uninstall the existing version of FaxNow!.
57383	Failed to delete existing program group directory: %s
57384	Unable to set up local FaxNow! Client
57385	Setup cannot proceed as a fax server still appears to be running. Shut down the fax server and re-run setup.
57386	Setup can upgrade existing phonebooks to enable new phonebook features. Not upgrading means that certains fields may be truncated or ignored and phonebook searches may be slow. Upgraded phonebooks cannot be accessed by 16-bit clients.\nWould you like to upgrade existing phonebooks for FaxNow! now?
57387	Failed to obtain License Agreement text
57388	Failed to upgrade existing file associations for the Rendering Module. The Rendering Module will need to be reconfigured for any file associations that you require.
57389	RedRock FaxNow!*